Tires: rotation, balance, repair, replacement
We rotate, balance, repair, and replace tires — and we’ll tell you straight whether you actually need new ones or whether you can safely get another season.
When tires need replacement
Tread depth at or below 4/32″ in winter conditions, or 2/32″ minimum legally. Visible cords, sidewall bulges, dry-rot cracking, or repeated flats from the same tire — these are all replacement-required signs. We measure every tire and show you the numbers, not just an opinion.
Newark roads, especially after winter, are hard on tires. Potholes can cause sidewall damage that isn’t always visible from the outside — if you hit one hard, it’s worth an inspection even if the tire holds air.
What we do
Tire installation and balancing
Mount, dynamic-balance, and torque-to-spec for any tire brand. We use modern road-force balancers — the same equipment many dealers use — because a properly balanced tire saves your suspension over the long haul.
Tire rotation
We rotate every 5,000-7,500 miles depending on your vehicle’s rotation pattern. Front and rear tires wear at different rates; rotating evens it out and gets the maximum life from the set.
Tire repair
Punctures in the tread area, away from the sidewall, are usually safely repairable with a proper patch-and-plug from inside. Sidewall damage isn’t repairable, and we’ll tell you when that’s the case.
Alignment at install
Mounting new tires is the right time to check your alignment. We can handle both in one visit.
Ready to bring your car in?
Appointments preferred, walk-ins welcome. Same-day service available by appointment.
